23 total views,  8 views today

Info from Elsewhere

The Magic 3 Superlight version is designed for up to
10 mph winds
has a flying weight as low as
345 g (12.2 oz),
an amazing weight for a model with a wing area of
33.8 dm2 (524 sq in).
The structure of the Super Light version is the same as the Allround, with the weight

Magic 3 SuperLight Glider Typical Weights
Bare structure 222 g 7.8 oz
Covering 52 g 1.8 oz
Total structure 274 g 9.7 oz
Rudder servo 5 g 0.2 oz
Elevator servo 5 g 0.2 oz
Spoiler servo 5 g 0.2 oz
Battery 50 g 1.8 oz
Flying weight from 345 g 12.2 oz

Notes from Build 2026

The existing 4 pieces are for the wing 4 are marked 1 for are marked 2, the plans does not show the second set of 4
on the balsa and ply sheet drawing,

I don’t believe they are different.

The sleeves do not fit well over the round angled wing joiners, significant sanding required
as well sanding req where joiner fits to center panel spar.
2 ribs missing hole for spoiler servo wire, at inboard end of center panel

Trailing edge material to thick, should be 2 mm alll the gussets as well , significant sanding required,
I rather sand these parts
before they get glued to the wing ribs